0.18mm edm molybdenum wire FR500G New Design
Edm Cutting Machine Standard Configuration:
1) Window XP System with Auto-CAD software control System.
2) PANASONIC converter ( Japan Panasonic )
3) "C" Structure HTK Casting Machine Body ( Japan HTK )
4) Standard DRO and Z axis motorized drive up and down.
5) Hiwin brand linear guide way install on XYZUV 5 axis ( P lever )
6) Hiwin brand ball screw install on XYZUV 5 axis ( C3 lever )
7) Automatic center lubrication system. (Not manual )
Cooperate Suppliers:
Linear guide way and ball screw supplier (HINWIN Taiwan)
Bearing supplier (NSK Japan )
Motor, Driver and Electric accessories supplier ( SIEMENS German)
Handle Remote supplier (EUCHNER German )
Industrial control system supplier (PHILIPS Europe)
Edm Cutting Machine Featurers:
1) Roughness: Ra ≤0.8um
2) 3 Time Cutting thickness : ≥200mm
3) Max Machining Speed: 200mm2/min
Factory Situation:
1). More than 1500 Sets Wire Cut Machine can be sold out in Chinese market each year.
2). Over 8000 sets EDM machines installed in China or other countries.
3). 8 steps checking for each machine by more than 25 QCS.
4). 20 years experience on EDM Machines (From 1997) , 300 employees.
5). 20 research personnel for developing new models or accessories.
Edm Cutting Machine Parameters
| Item |
unit |
FR-500G/M/S |
FR-600G/M/S |
FR-700G/M/S |
| Worktable size (L×W) |
mm |
580*770 |
680*940 |
720*1040 |
| Table travel(X×Y) |
mm |
350*500 |
400*600 |
450*700 |
| Max. work piece thickness |
mm |
250 |
300 |
300 |
| U.V axis |
mm |
20*20 |
20*20 |
20*20 |
|
Max. taper angle/plate thickness
|
degree/mm |
±6°/80mm G model
±12°/80mm M model
±6°/80mm S model
|
|
Motor type
|
step or servo |
G model Step motor
M model Step motor
S model Servo motor
|
| Wire diameter |
mm |
0.16-0.20 |
0.16-0.20 |
0.16-0.20 |
| Machine accuracy |
Octagon |
mm |
±0.005 |
±0.005 |
±0.005 |
| Angle |
mm |
0.012 |
0.012 |
0.012 |
| Roughness, thrice cutting |
um |
≤0.8 |
≤0.8 |
≤0.8 |
| Max. machining speed |
mm²/min |
200 |
200 |
200 |
| Machine dimensions(W×L×H) |
mm |
1300*1770*1880 |
1540*1920*2020 |
1730*2020*2080 |
| Machine weight |
Kg |
1700 |
2000 |
2300 |
| Controller dimensions(W×L×H) |
Mm |
600*800*1800 |
600*800*1800 |
600*800*1800 |
| Wire traveling speed |
m/min |
5-11 |
5-11 |
5-11 |
| Load of table |
Kg |
400 |
500 |
600 |
| Rated Power |
KVA |
3 |
3 |
3 |
Edm Cutting Machine Introduction
Considering the main problems existing in the old type Fast Speed wire cut machine such as low cutting precision, bad surface finishing and slow cutting speed, while the brass wire cut machine is much more expensive and difficult to learn, we develop the second generation Middle Speed Wire Cutting machine based on the technology from Brass wire cut machine, deeply improves the cutting precision, surface finishing (Ra≤0.8um), cutting speed to make the cutting life and technology almost same as brass wire cut machine. But the machine's purchase cost is much lower than brass wire cut machine, the operator who has a little experience of fast speed wire cut machine can use our machine immediately. Comprehensive efficiency is 2 or 3 time as fast speed wire cut machine.
Product Tags:
|
|
Solid Casting Base Edm Cutting Machine , 3Kw Cnc Wire Edm Machine 1540*1920*2020mm Images
|
